Fixing Battery Not Charging on Windows 10 After Factory Reset
## Direct Answer
If your battery is not charging on Windows 10 after a factory reset, try updating your battery driver, checking for BIOS updates, and ensuring your power settings are set to charge the battery. If these steps don’t work, you may need to calibrate your battery or seek further technical support.
## Step-by-Step Guide
1. **Update Battery Driver**:
– Open Device Manager (Press Windows + X and select Device Manager).
– Expand “Batteries” section.
– Right-click on “Microsoft AC Adapter” and “Microsoft ACPI-Compliant Control Method Battery”.
– Select “Update driver” and follow the prompts.
2. **Check for BIOS Updates**:
– Restart your laptop and enter the BIOS setup (usually by pressing F2, F12, or Del).
– Check the BIOS version and look for any battery-related settings.
– If an update is available, follow the manufacturer’s instructions to update the BIOS.
3. **Check Power Settings**:
– Go to Settings (Press Windows + I).
– Click on “System” and then “Power & sleep”.
– Ensure the battery is set to charge when the laptop is plugged in.
4. **Calibrate the Battery**:
– Charge the battery to 100%.
– Let it discharge to 0% (it may take several hours).
– Charge it to 100% again.
– This process helps Windows 10 to correctly gauge the battery’s capacity.
## FAQ
– **Q: Why won’t my battery charge after a factory reset?**
A: This could be due to outdated drivers, incorrect BIOS settings, or the need to calibrate the battery.
– **Q: How often should I calibrate my battery?**
A: Calibration should be done every 3-6 months to ensure the battery’s health and performance.
– **Q: Can I use my laptop while the battery is calibrating?**
A: It’s best to let the battery discharge and charge without using the laptop for accurate calibration.
Leave a Reply